Enters The Battlefield With Counters | Does Entering The Battlefield With Counters Count As Putting Counters On?

Bloodspore Thrinax · Double Masters (2Xm) #155 · Scryfall Magic The Gathering Search

Table of Contents

Does entering the battlefield with counters count as putting counters on?

Some spells and abilities refer to counters being put on an object. This means the counters are added to the object while it’s on the battlefield. It also applies to an object that enters the battlefield with counters already on it.

Let’s break down this concept a bit more. Imagine a card that reads “Whenever counters are put on a creature you control, draw a card.” This means you’ll draw a card if a counter is added to the creature while it’s on the battlefield, or if it enters the battlefield with counters already on it.

Now, let’s consider a card that says “Whenever a creature enters the battlefield with counters on it, you gain life equal to the number of counters on that creature.” This means you gain life only if the creature enters the battlefield with counters already on it, not if counters are added to it later.

It’s important to remember that the wording of the card will determine when counters are considered “put on” an object. Sometimes, the wording will explicitly state “counters are put on” while other times, the wording might say “enters the battlefield with counters on it.” Pay close attention to the wording of the card so you can properly understand how counters affect the game.

What counts as entering the Battlefield?

Entering the Battlefield in Magic: The Gathering refers to putting a permanent onto the battlefield. This is a common action in the game and is often abbreviated as ETB.

A permanent is a card that stays on the battlefield for the duration of the game. It can be a creature, land, artifact, enchantment, or planeswalker.

When a permanent enters the battlefield, it triggers abilities that are specifically designed to be activated when this event occurs. These abilities can have various effects, such as adding mana to your pool, drawing a card, or even destroying another permanent.

For example, [[Lightning Greaves]], an artifact enchantment, has an ETB ability that allows you to tap it to give a creature you control hexproof until the end of the turn. This means that the creature cannot be targeted by spells or abilities your opponents control.

There are many other cards in Magic with powerful ETB abilities. [[Elite Vanguard]], a creature, has an ETB ability that allows you to create a 1/1 white Soldier creature token.

Understanding how ETB abilities work is crucial for winning games of Magic. By knowing which cards have these abilities and how they work, you can create powerful strategies and outmaneuver your opponents.

Does casting count as entering the battlefield?

Casting a spell is not the same as putting a card onto the battlefield. Casting a spell refers to playing a nonland card from your hand. Putting a card onto the battlefield can happen in many different ways, such as using an ability or resolving a spell that puts a card directly onto the battlefield.

Let’s break this down a bit further. Casting a spell is a specific action that involves moving a card from your hand to the stack. The stack is a temporary zone where spells and abilities wait to be resolved. When a spell resolves, it has its effect, and this effect can include putting a card onto the battlefield.

Entering the battlefield is a general term used to describe the action of a card coming into play from anywhere other than your hand. For example, you can put a creature card onto the battlefield from your hand by casting it, or you can put a creature card onto the battlefield from your graveyard by using a reanimate spell.

Think of it like this: Casting is the process of putting a card onto the battlefield, while entering the battlefield is the result of that process.

So, while casting is one way to put a card onto the battlefield, it’s not the only way. It’s important to remember that casting is a specific action that can be used to put a card onto the battlefield, but it’s not the only action that can do so. There are many other ways to put a card onto the battlefield, such as using abilities, resolving spells that put cards directly onto the battlefield, or even using cards from outside the game like tokens.

Does a creature enter the battlefield tapped?

Let’s break down this card effect and learn about how creatures and lands enter the battlefield tapped.

Your opponents’ creatures and nonbasic lands enter the battlefield tapped. This means that when a creature or nonbasic land that your opponent controls comes into play, it cannot attack or use its abilities on the turn it enters the battlefield. This can be a huge advantage for you, as you’ll have more time to develop your board and prepare for your opponent’s threats.

Whenever Thalia and The Gitrog Monster attacks, sacrifice a creature or land, then draw a card. This ability gives you a powerful engine to generate card advantage. Sacrificing a creature or land to draw a card allows you to keep your hand full of options and keep the pressure on your opponent.

The “Tapped” Condition

When a creature or land enters the battlefield tapped, it’s a bit like it’s “sleepy” or “not ready for action” yet. It’s a common restriction in Magic: The Gathering that can significantly impact the flow of a game.

Imagine a creature coming into play – a powerful, ferocious beast ready to tear through your opponent’s defenses. But if it enters tapped, it’s like the creature has just woken up from a long nap. It’s groggy, its muscles are stiff, and it needs a moment to get its bearings before it can join the battle.

The same applies to lands. A tapped land can’t produce mana for you to play spells or activate abilities. It needs to “wake up” and become untapped before it can contribute to your game plan.

There are many different ways that creatures and lands can enter the battlefield tapped. Here are a few examples:

Some cards have abilities that specifically force creatures or lands to enter tapped, like the effect we saw earlier with Thalia and The Gitrog Monster.
Some cards have effects that create tokens, and those tokens might enter the battlefield tapped.
Some spells or abilities can tap permanents as they enter the battlefield.

Understanding how these effects work can be a critical part of making smart decisions in Magic: The Gathering. You’ll need to consider the potential benefits and drawbacks of playing cards that enter tapped and how to utilize them to your advantage.

Does copying a card count as entering the battlefield?

When a card enters the battlefield as a copy of another object, it becomes a copy the moment it enters the battlefield. This means the card doesn’t enter the battlefield as a regular card and then transform into a copy. It’s already a copy from the start.

Let’s break it down with an example. Imagine you cast Clone and target a Grizzly Bear. Clone enters the battlefield as a copy of Grizzly Bear. It doesn’t appear as a blank card and then suddenly become a Grizzly Bear. It’s a Grizzly Bear the moment it hits the battlefield.

This might seem a little tricky at first, but it’s crucial for understanding how copying works in Magic. Think of it this way: The copy effect is baked into the card’s creation process. So when a card enters the battlefield as a copy, it skips the step of entering as a regular card and directly becomes the copy. You can see this rule in action in many cards like Mirror Entity, Stolen Identity, and Rite of Replication. These cards all create copies of existing permanents, and those copies are created as copies, not transformed into copies after entering the battlefield.

Does flipping count as entering the battlefield?

When a card transforms, it usually doesn’t count as entering the battlefield. But some cards let you exile the card and return it to the battlefield transformed. This is like Jace, Vryn’s Prodigy. In this case, it counts as entering the battlefield when it comes back.

Let’s explore this further. When a card transforms, it changes from one side to another. It’s essentially the same card, but it has different abilities and stats. The transformation itself doesn’t trigger “enters the battlefield” abilities.

Think of it like this: A creature card is like a car. When you first get the car, it’s brand new. It has all its original features and is ready to drive. This is like a card when it first enters the battlefield. Now, let’s say you later modify your car, adding new parts or upgrades. This change doesn’t mean the car is a brand new car. It’s the same car, just with some improvements. The same is true with a card that transforms. It’s still the same card, even though it’s now in its transformed state.

However, there are some special cards that allow you to return a card to the battlefield transformed. These cards basically “reset” the card, giving it a new life. When a card returns to the battlefield transformed, it essentially counts as a new card entering the battlefield. This is why cards like Jace, Vryn’s Prodigy trigger “enters the battlefield” abilities. It’s like getting a new car with all its original features, but it’s the same car you had before.

So, to summarize, the act of a card transforming itself doesn’t trigger “enters the battlefield” abilities. However, if a card is exiled and then returns to the battlefield transformed, it does count as entering the battlefield.

Does creating a token count as entering the battlefield?

Let’s talk about tokens in Magic: The Gathering! You’re probably wondering, does creating a token count as entering the battlefield? The answer is yes! A token is like a stand-in for a real card, and when you create it, it officially joins the game.

Think of it this way: You’re playing a game of Magic and you’re about to cast a spell. The spell reads, “Create a 1/1 whiteSoldier token.” When you cast that spell, a little Soldier token pops into existence on the battlefield. It’s ready to fight! This means that the Soldier token entered the battlefield.

Here’s what you need to know: Tokens are a unique part of Magic, and they can be created by spells, abilities, or even some special cards. They are permanent, which means they can stick around for a while until they’re destroyed or removed from the game. When you create a token, you can’t always choose what it is, sometimes the card will tell you exactly what kind of token it is, but you can choose where it enters the battlefield. You get to pick if you want it on the battlefield in front of you, or maybe in front of your opponent.

Remember, just because a token is created doesn’t necessarily mean it’s going to be around for long. Lots of spells and abilities in Magic target specific types of permanents, and tokens are no exception.

A few important things to remember:

Tokens don’t have a card. That means they don’t have an actual card that you can pick up and look at. It’s just a little marker on the battlefield.
Tokens don’t have an official name. They’re just called what they are, like “Soldier token”, “Saproling token”, or “Treasure token”.

And now you know all about tokens! They’re a fun and important part of Magic, and they can make your strategies even more interesting.

Does putting a land onto the battlefield count as playing it?

You’re right! Putting a land onto the battlefield doesn’t count as playing a land.

It happens during the resolution of the ability, which means you don’t actually choose to put it onto the battlefield. You’re essentially forced to do it by the effect of the card, making it different from the traditional “playing” of a card.

This can be confusing because you’re still putting it onto the battlefield, but think of it this way: Imagine you’re given a gift. You didn’t choose to receive it, but you still end up with the gift. In the same way, you didn’t choose to put those lands onto the battlefield, but they still end up on the field due to the ability’s effect.

This is important because some cards have effects that trigger when you play a land, and those effects wouldn’t trigger when you put lands onto the battlefield as a result of a specific ability. For example, if a card says, “Whenever you play a land, add a +1/+1 counter to each creature you control,” you wouldn’t add counters if the land was put onto the battlefield from an ability.

Let’s take a specific example. Imagine you have a card that says, “Discard your hand. Put a land card onto the battlefield for each card discarded this way.” In this scenario, you don’t get to choose which land you put onto the battlefield, and you don’t get to choose when you put it onto the battlefield. The ability dictates that you must put them onto the battlefield as soon as the effect resolves.

So, while you may be putting those lands onto the battlefield, it’s not a “playing” action, but rather a result of an effect. It’s important to remember the difference because it can impact how some cards work on the battlefield!

See more here: What Counts As Entering The Battlefield? | Enters The Battlefield With Counters

How do you counter artifacts?

Let’s talk about Arcbound Crusher and how it can be a real pain for your opponents if they’re playing a lot of artifacts.

Arcbound Crusher has a special ability called Modular 1. This means it comes onto the battlefield with a +1/+1 counter on it, and when it dies, you can transfer those counters to another artifact creature. But here’s the best part: every time another artifact enters the battlefield, you get to put a +1/+1 counter on Arcbound Crusher!

This makes Arcbound Crusher a real threat, especially if your opponent has a strategy that relies heavily on artifacts. It can quickly become a giant, unstoppable force that can smash through your opponent’s defenses.

So how do you counter artifacts?

Well, the answer is simple: destroy them! There are a lot of different ways to do this, depending on what kind of deck you’re playing.

Here are a few ideas:

Creature Removal: This is the most basic way to deal with artifacts. You can use spells or creatures that target artifacts and destroy them.
Board Wipes: Some spells can destroy all artifacts on the battlefield, which is a great way to clear the way for your own creatures.
Artifact Hate: There are some cards specifically designed to deal with artifacts. These cards can prevent your opponent from playing artifacts in the first place, or they can destroy artifacts that are already on the battlefield.

You can also use strategies that don’t involve directly destroying artifacts. For example, you could try to control the board and prevent your opponent from playing any artifacts at all. Or you could try to flood the battlefield with your own creatures so that your opponent’s artifacts become less effective.

Ultimately, the best way to counter artifacts depends on your deck and the specific strategies of your opponent. But if you’re facing a deck with a lot of artifacts, you’ll need to be prepared to deal with them. Remember, the key is to stay flexible and adapt to the situation.

How do you counter a sigiled Sentinel creature?

How to Handle a Sigiled Sentinel

Sigiled Sentinel is a powerful creature with a solid base stat line. It’s a 2/2 for 3 mana, which is already a good deal, but it also has a potent ability that allows you to buff other creatures. Let’s break down how to counter it:

The Challenge: The Sigiled Sentinel’s ability puts +1/+1 counters on target creatures when it enters the battlefield. This can quickly snowball, especially if you’re playing a deck with a lot of small creatures. It’s a real pain to deal with!

The Solution: The best way to counter Sigiled Sentinel is to prevent it from entering the battlefield in the first place. Here are a few strategies to keep in mind:

Removal Spells: Use instant or sorcery spells to destroy the Sigiled Sentinel before it can trigger its ability. Cards like Doom Blade or Lightning Bolt can be very effective.
Creature Removal: If you have a creature that can kill the Sigiled Sentinel in combat, that’s another great way to shut down its ability. Elite Vanguard is a good choice for this, as it can also deal damage to other creatures.
Counterspells: If you can stop the Sigiled Sentinel from being cast in the first place, that’s the most effective way to counter it. Cards like Counterspell or Mana Leak can be very effective.
Board Wipes: If you have a board wipe spell like Wrath of God or Damnation, you can wipe out all creatures, including the Sigiled Sentinel, and start fresh.

Don’t Forget About Backup! The Sigiled Sentinel also has the Backup ability. This means that when it enters the battlefield, you can choose to put a +1/+1 counter on another creature instead. Keep this in mind when planning your counterstrategies. If you’re worried about the Sigiled Sentinel buffing another creature, you can use a removal spell on that target creature instead.

In Conclusion: The Sigiled Sentinel is a powerful creature, but it’s not unbeatable. By understanding its strengths and weaknesses, you can develop effective strategies to counter it. Remember, the key is to prevent it from entering the battlefield or to remove it from play as quickly as possible. Good luck!

How do you get a +1 +1 counter on omarthis?

Omarthis, Ghostfire Initiate enters the battlefield with X+1/+1counters on it. Whenever you put one or more +1/+1counters on another colorless creature, you may put a +1/+1counter on Omarthis. When Omarthis dies, manifest a number of cards from the top of your library equal to the number of counters on it.

So, how do you get a +1/+1counter on Omarthis? There are two main ways.

First, when Omarthis enters the battlefield, you can choose to have it start with X+1/+1counters. This means you can choose how many counters Omarthis starts with, which is determined by how much mana you have available. The more mana you spend, the more counters you put on Omarthis.
Second, you can use abilities that put +1/+1counters on other colorless creatures. Anytime you do this, you get the option of putting a +1/+1counter on Omarthis. Some examples of cards that put +1/+1counters on colorless creatures include:
Counterspell: This counters a spell and gives a +1/+1counter to a colorless creature.
Beast Whisperer: This can put +1/+1counters on a colorless creature.

These are just a couple of ways to put +1/+1counters on Omarthis. The key is to look for ways to put +1/+1counters on other colorless creatures. Each time you do, you can also give Omarthis a +1/+1counter as well.

How do you get a +1/+1 counter in Bloodline pretender?

Bloodline Pretender is a powerful creature card that can grow stronger with each creature of a specific type you play. Let’s break down how to get those +1/+1 counters rolling.

When you play Bloodline Pretender, you choose a creature type. It could be Human, Elf, Dragon, Zombie, or any other type. This choice is key!

Here’s the kicker: Whenever another creature of the type you chose enters the battlefield under your control, Bloodline Pretender gets a +1/+1 counter. So, if you choose Elf and play an Elvish Mystic, your Bloodline Pretender gets a +1/+1 counter!

To maximize Bloodline Pretender’s potential, consider building your deck around a single creature type. This strategy ensures you’ll consistently get those counters.

For example, you could build a deck full of Humans, like Thalia, Guardian of Thraben or Ajani, Adversary of Tyrants. With each Human you play, your Bloodline Pretender will grow stronger and stronger!

This strategy is a great way to get a powerful creature quickly. Remember, with a little strategy and planning, you can use Bloodline Pretender to dominate the battlefield!

See more new information: musicbykatie.com

Enters The Battlefield With Counters | Does Entering The Battlefield With Counters Count As Putting Counters On?

Alright, let’s talk about counters in the world of gaming. This is where things get interesting, especially when we’re talking about strategy games. In these games, counters are like the ultimate rock-paper-scissors situation. Think of it this way: if you’re playing StarCraft, and you’ve got a bunch of Zerglings, you’re going to want to be prepared for a Marine attack. Why? Because Marines are counters to Zerglings, they’re the perfect solution to that pesky Zerg rush.

The Art of Counter-Picking

So, counter-picking is all about knowing your enemy and their units and then using your own units to take advantage of their weaknesses. It’s like having a secret weapon that your opponent isn’t expecting. It’s a real mind game, and the more you understand about your opponent’s strategy and the units they’re likely to use, the better your chances of winning.

Common Counter Examples

Let’s break it down with some real-world examples, shall we?

* StarCraft:

* MarinescounterZerglings
* MutaliskscounterTanks
* HydraliskscounterMutalisks
* Warcraft III:

* Arch MagescounterFootmen
* HunterscounterArch Mages
* Ogre MagicounterHunters
* Age of Empires:

* ArcherscounterSpearmen
* KnightscounterArchers
* Siege OnagerscounterKnights

Countering Strategies: Think Beyond the Basics

Now, remember, countering isn’t just about having the right unit to kill another unit. It’s about thinking strategically and using your units in the best way possible.

Let’s say you’re playing against Zerglings in StarCraft. You’ve got your trusty Marines, but they’re not just going to win automatically. Here’s where strategy comes in.

* Micro-management: You’re going to need to position your Marines carefully to make the most of their range and attack speed. Don’t let those Zerglings get too close!
* Support units: Consider using Medics to help your Marines stay alive and keep them fighting longer.
* Terrain advantage: Use terrain to your advantage. Maybe you can build your base in a spot where the Zerglings have a hard time attacking.

Counter-picking in Team Games

Things get even more interesting when you’re playing a team game like League of Legends or Dota 2. Now, you’ve got to think about counter-picking your opponent’s champions and also considering the champions that your teammates are playing.

* Synergy: It’s important that your champions work well together. You want to have a team composition that complements each other’s strengths and weaknesses.
* Teamfight: How do your champions perform in teamfights? This is a key consideration when choosing your champion because you want to be able to counter your opponents’ teamfight strategies.

Countering in Other Games

Counters aren’t just a thing in real-time strategy games. They’re found in all sorts of games, even card games and board games.

* Magic: The Gathering:Counterspells are a classic example of counters in Magic. These spells can stop your opponent from casting their spells.
* Yu-Gi-Oh!Traps and Monsters can counter your opponent’s attacks and strategies.
* Chess:PawnscounterKnights, KnightscounterBishops, and so on.

Conclusion

Counter-picking is a core part of strategy games. It’s about knowing your opponent, knowing your own strengths, and using your units and strategies to overcome your opponent’s weaknesses. Mastering this art takes time and practice, but the rewards are definitely worth it. So, get out there, learn your counters, and start winning those games!

FAQs

Q: What are some good resources for learning about counters?

A: There are tons of resources available online and in books. Some good places to start include:

* Game forums: You can find discussions and guides on counter-picking from experienced players in specific game forums.
* Wiki pages: Many popular games have wiki pages dedicated to counter-picking strategies.
* Video tutorials: YouTube is a great place to find video tutorials on how to counter-pick different units and champions.

Q: Is there any way to know what my opponent is going to pick?

A: Unfortunately, you can’t know for sure what your opponent is going to pick. However, you can make some educated guesses based on the following:

* Opponent’s past behavior: If you’ve played against this opponent before, you can see if they have any favorite strategies or units.
* Game state: The current state of the game, like the map, the resources, and the units each player has, can provide clues about what your opponent might do.
* Opponent’s style: Some players are more aggressive, while others are more passive. This can give you an idea of their likely strategies.

Q: What if my opponent picks a counter to my counter?

A: This is where the real mind games begin! The best way to deal with this is to adapt your strategy.

* Switch your units: If you find your counter isn’t working, you might need to switch to a different unit or strategy.
* Focus on micro-management: Even if your opponent is using a counter, you can still win by out-playing them with your micro-management.
* Use terrain to your advantage: Sometimes a little bit of smart terrain use can make a big difference.

Remember, counter-picking is an ongoing process. It’s not about finding the perfect counter and then sticking with it forever. You need to be adaptable and willing to change your strategy based on what your opponent is doing.

+creature, +enters, +battlefield, ++1/+1, +counter, +another

Whenever another artifact enters the battlefield, put a +1/+1 counter on Arcbound Crusher. Modular 1 (This creature enters the battlefield with a +1/+1 counter on it. When it dies, Gatherer

Enters with counters : r/mtgrules – Reddit

If the permanent enters the battlefield with counters, the event of “entering the battlefield” is replaced by the event of “entering the battlefield with counters”; in other Reddit

o:”enters the battlefield” o:”counters” o:”x” – Scryfall

Whenever another creature enters the battlefield under your control, you may pay {G/W}. If you do, put a +1/+1 counter on it. If it’s a Unicorn, put two +1/+1 counters on it instead. ( Scryfall

+wizard, +enters, +the, +battlefield (307) – Magic: The Gathering

Academy Elite enters the battlefield with X +1/+1 counters on it, where X is the number of instant and sorcery cards in all graveyards., Remove a +1/+1 counter from Academy Gatherer

When a creature enters the battlefield with a +1/+1

122.6. Some spells and abilities refer to counters being put on an object. This refers to putting counters on that object while it’s on the Reddit

magic the gathering – Danny Pink and “enters the battlefield with …

In this recent installment of “too specific” on EDHREC.com the author argues that Metallic Mimic wouldn’t be that good with Danny Pink since creatures of the chosen Board & Card Games Stack Exchange

Is “Enters the battlefield WITH” and ETB ability? : r/magicTCG

“Graft N” means “This permanent enters the battlefield with N +1/+1 counters on it” and “Whenever another creature enters the battlefield, if this permanent has a +1/+1 counter Reddit

Card Search – Search: +lands, +enter, +the, +battlefield

Scholar of New Horizons enters the battlefield with a +1/+1 counter on it. , Remove a counter from a permanent you control: Search your library for a Plains card and reveal Gatherer

How does copying a creature with +1/+1 counters on it work?

answered Jan 22, 2019 at 8:46. ikegami. 47.8k 3 84 167. Add a comment. 3. It depends on both what is doing the copying and what exactly is the copied creature. I’m going to Board & Card Games Stack Exchange

o:”additional +1/+1 counter” · Scryfall Magic The Gathering Search

When you spend this mana to cast a Dragon creature spell, it enters the battlefield with an additional +1/+1 counter on it and gains hexproof until your next turn. Illustrated by Scryfall

Counters | Magic Made Easy | Learn To Play Magic: The Gathering